I am so in love with these LED lights. They are super easy to install and use. I have them setup behind my tv and in my bedroom. These really turn any area into something visually stunning. You wont be sorry if you are looking to take your decorating to the next level.
I also have a set of these set up inside of my car and let me tell you its cool AF. They have a peel and stick backing, which makes it really easy and fast to install these anywhere. You can get additional plugs for them or if you "know" what you are doing, you can hook them directly to the car power.
Here is what the company had to say about them:
Specifications:
Length of led light strip: 16.4FT/5M
LED Quantity: 300 LEDs (60LEDs/m)
LED type: SMD5050 LED
Basic Color: RGB
Beam angle: 120 degrees
Input voltage: 12V DC
Lifespan: over 50,000hrs
Power: 0.2w/led; 60w/300leds
Working Current/5Meter: 5A
Working Temperature: -20° to 50°
Protection Rate: Waterproof (DO NOT submerse it into water)
Optimum Working Temperature: -25° to 50°
Length of led light strip: 16.4FT/5M
LED Quantity: 300 LEDs (60LEDs/m)
LED type: SMD5050 LED
Basic Color: RGB
Beam angle: 120 degrees
Input voltage: 12V DC
Lifespan: over 50,000hrs
Power: 0.2w/led; 60w/300leds
Working Current/5Meter: 5A
Working Temperature: -20° to 50°
Protection Rate: Waterproof (DO NOT submerse it into water)
Optimum Working Temperature: -25° to 50°
Warranty Policy
Comes with a full 12 month warranty, free replacement or full refund. If you have any problem
with our products, please feel free to contact us.
Comes with a full 12 month warranty, free replacement or full refund. If you have any problem
with our products, please feel free to contact us.
What's in the box?
1 x Homaz Waterproof SMD5050 RGB LED Light Strip
1 x IR Controller Box
1 x 44key Remote Controller
1 x 12V/5A Power Adapter
1 x Homaz Waterproof SMD5050 RGB LED Light Strip
1 x IR Controller Box
1 x 44key Remote Controller
1 x 12V/5A Power Adapter
Warm Tips:
1. Please don't leave the led light strips on the spool when you going to test it for more than 2 mins, it easy to
lead to overheating. The ventilation must be ensured. These lights need an excessive
amount of airflow for cooling.
2. Make sure the mounting surface is clean and will hold the adhesive tape. We recommend
cleaning the surface with alcohol for best results.
3. When installing the led light strip, just line up the marked arrows, make sure all connection right before power switched on.
4. Please insure there is no obstacle between the IR controller and the receiver when
operating; Take off the plastic sheet of remotes battery before using.
1. Please don't leave the led light strips on the spool when you going to test it for more than 2 mins, it easy to
lead to overheating. The ventilation must be ensured. These lights need an excessive
amount of airflow for cooling.
2. Make sure the mounting surface is clean and will hold the adhesive tape. We recommend
cleaning the surface with alcohol for best results.
3. When installing the led light strip, just line up the marked arrows, make sure all connection right before power switched on.
4. Please insure there is no obstacle between the IR controller and the receiver when
operating; Take off the plastic sheet of remotes battery before using.
0 comments:
Post a Comment